kansai

Technology Reports of Kansai University

Technology Reports of Kansai University (ISSN: 04532198) is a monthly peer-reviewed and open-access international Journal. It was first built in 1959 and officially in 1975 till now by kansai university, japan. The journal covers all sort of engineering topic, mathematics and physics. Technology Reports of Kansai University (TRKU) was closed access journal until 2017. After that TRKU became open access journal. TRKU is a scopus indexed journal and directly run by faculty of engineering, kansai university.

Google Scholar

Submission Deadline

Volume - 66 , Issue 02
26 Jan 2025
Day
Hour
Min
Sec

Upcoming Publication

Volume - not available , Issue not available
00:00:00

Aim and Scope

Technology Reports of Kansai University (ISSN: 04532198) is a peer-reviewed journal. The journal covers all sort of engineering topic as well as mathematics and physics. the journal's scopes are in the following fields but not limited to:

Electrical Engineering and Telecommunication Section:

Electrical Engineering, Telecommunication Engineering, Electro-mechanical System Engineering, Biological Biosystem Engineering, Integrated Engineering, Electronic Engineering, Hardware-software co-design and interfacing, Semiconductor chip, Peripheral equipments, Nanotechnology, Advanced control theories and applications, Machine design and optimization , Turbines micro-turbines, FACTS devices , Insulation systems , Power quality , High voltage engineering, Electrical actuators , Energy optimization , Electric drives , Electrical machines, HVDC transmission, Power electronics.

Computer Science Section :

Software Engineering, Data Security , Computer Vision , Image Processing, Cryptography, Computer Networking, Database system and Management, Data mining, Big Data, Robotics , Parallel and distributed processing , Artificial Intelligence , Natural language processing , Neural Networking, Distributed Systems , Fuzzy logic, Advance programming, Machine learning, Internet & the Web, Information Technology , Computer architecture, Virtual vision and virtual simulations, Operating systems, Cryptosystems and data compression, Security and privacy, Algorithms, Sensors and ad-hoc networks, Graph theory, Pattern/image recognition, Neural networks.

Civil and architectural engineering :

Architectural Drawing, Architectural Style, Architectural Theory, Biomechanics, Building Materials, Coastal Engineering, Construction Engineering, Control Engineering, Earthquake Engineering, Environmental Engineering, Geotechnical Engineering, Materials Engineering, Municipal Or Urban Engineering, Organic Architecture, Sociology of Architecture, Structural Engineering, Surveying, Transportation Engineering.

Mechanical and Materials Engineering :

kinematics and dynamics of rigid bodies, theory of machines and mechanisms, vibration and balancing of machine parts, stability of mechanical systems, mechanics of continuum, strength of materials, fatigue of materials, hydromechanics, aerodynamics, thermodynamics, heat transfer, thermo fluids, nanofluids, energy systems, renewable and alternative energy, engine, fuels, nanomaterial, material synthesis and characterization, principles of the micro-macro transition, elastic behavior, plastic behavior, high-temperature creep, fatigue, fracture, metals, polymers, ceramics, intermetallics.

Chemical Engineering :

Chemical engineering fundamentals, Physical, Theoretical and Computational Chemistry, Chemical engineering educational challenges and development, Chemical reaction engineering, Chemical engineering equipment design and process design, Thermodynamics, Catalysis & reaction engineering, Particulate systems, Rheology, Multifase flows, Interfacial & colloidal phenomena, Transport phenomena in porous/granular media, Membranes and membrane science, Crystallization, distillation, absorption and extraction, Ionic liquids/electrolyte solutions.

Food Engineering :

Food science, Food engineering, Food microbiology, Food packaging, Food preservation, Food technology, Aseptic processing, Food fortification, Food rheology, Dietary supplement, Food safety, Food chemistry.

Physics Section:

Astrophysics, Atomic and molecular physics, Biophysics, Chemical physics, Civil engineering, Cluster physics, Computational physics, Condensed matter, Cosmology, Device physics, Fluid dynamics, Geophysics, High energy particle physics, Laser, Mechanical engineering, Medical physics, Nanotechnology, Nonlinear science, Nuclear physics, Optics, Photonics, Plasma and fluid physics, Quantum physics, Robotics, Soft matter and polymers.

Mathematics Section:

Actuarial science, Algebra, Algebraic geometry, Analysis and advanced calculus, Approximation theory, Boundry layer theory, Calculus of variations, Combinatorics, Complex analysis, Continuum mechanics, Cryptography, Demography, Differential equations, Differential geometry, Dynamical systems, Econometrics, Fluid mechanics, Functional analysis, Game theory, General topology, Geometry, Graph theory, Group theory, Industrial mathematics, Information theory, Integral transforms and integral equations, Lie algebras, Logic, Magnetohydrodynamics, Mathematical analysis.

Latest Articles of

Technology Reports of Kansai University

Journal ID : TRKU-19-03-2021-11448
Total View : 548

Title : Gender Development Policy Scenario with Dynamic System Models in Coastal Rural Based Areas

Abstract :

Human development focuses on equality and justice between women and men.  Gender Development Index can be used for human development analysis. The GDI value is the ratio between the human development index of women and men. Human development problems in coastal rural-based areas are a very complex system. The method of data analysis by the systems approach is a dynamic systems model. A dynamic system is a methodology that focuses on policy-making and how the policy determines the behavior of problems that can be dynamically modeled by the system. The purpose of this study is to analyze a gender development policy scenario with a dynamic system model. Data was collected from secondary sources, namely from the book Gender-based Human Development. The results of the analysis show the best scenario in a coastal rural-based area. The best scenario for the policy are expected number of school years -female = 13.5 years, length of school rate _female = 12 years, purchasing_power _female = 16.3 (ln 12,000,000) from the fact 15.79 (ln 7,171,000).Human development focuses on equality and justice between women and men.  Gender Development Index can be used for human development analysis. The GDI value is the ratio between the human development index of women and men. Human development problems in coastal rural-based areas are a very complex system. The method of data analysis by the systems approach is a dynamic systems model. A dynamic system is a methodology that focuses on policy-making and how the policy determines the behavior of problems that can be dynamically modeled by the system. The purpose of this study is to analyze a gender development policy scenario with a dynamic system model. Data was collected from secondary sources, namely from the book Gender-based Human Development. The results of the analysis show the best scenario in a coastal rural-based area. The best scenario for the policy are expected number of school years -female = 13.5 years, length of school rate _female = 12 years, purchasing_power _female = 16.3 (ln 12,000,000) from the fact 15.79 (ln 7,171,000).

Full article
Journal ID : TRKU-09-03-2021-11444
Total View : 545

Title : Multi Reservoir Operation Rules with Interconnected Tunnel and Water Transfer

Abstract :

The multi-reservoir operation rules require accuracy in developing its technical parameters. This is done to prevent operational failure in one of the reservoirs. The water transfer concept is to manage the water resources distribution between the receiving watershed and the donor watershed. The availability of transferable water must prioritize meeting the water needs of the donor reservoir. The use of storage capacity in both reservoirs aims to meet water needs, especially in the recipient. The location and capacity of the interconnected tunnels will determine the operation pattern of the multi-reservoir. The reservoir operating rule is expected to be a reference in the multi-reservoirs operation to obtain an optimal reservoir operating rule.

Full article
Journal ID : TRKU-08-03-2021-11442
Total View : 584

Title : Automatic Observation Of "Diver"And Pumping Of Longstorage Banger Semarang City Indonesia

Abstract :

Floods that occur on the north coast of Central Java are caused by high rainfall and the presence of ROB including floods that occur in the Catchment area of the Semarang city banger, where there is high rainfall, where when there is high rain, water flows from upstream to downstream carrying waste material. In the form of used bottles, plastics, tree branches, leaves and other rubbish in the presence of this garbage will disrupt and inhibit the flow of water, which both happens in the longstrage banger and in channel A2. Semarang by optimizing longstorage. To find out the water level in the longstorage the method is to install a peil schal or measuring meter in the long storage banger in addition to installing a Diver device that is paired with the peil schal tool if the water has reached a certain elevation according to the stipulated provisions, the water in Longstorage banger then the pump is discharged into the BKT river in Semarang City. Based on the results of measurements and field observations, when it rains in the Banger cathment area, it is directly proportional to the observation using the Diver tool and is juxtaposed with the observation results at the nearest rainfall station, namely BMKG maritin. Observation and installation of tools were carried out on 24 February to 5 March 2020 based on observations and reading data on your maximum elevation diver on 24 and 25 February 2020 while based on daily and hourly rainfall data obtained from BMKG, Maritime Station, the rainfall intensity is 25 mm. and the flood discharge is 34 m3/s and the water level in the Banger longstorage is 0.8 m, based on these data, it is a straight line with good observation using the Diver tool and with the data obtained at the bulk station.

Full article
Journal ID : TRKU-07-03-2021-11441
Total View : 587

Title : Addressing challenges to a systematic thinking pattern of scientists: A literature review of cognitive bias in scientific work

Abstract :

The scientist plays an essential role in making discoveries and inventions. However, human limitation and individual reasoning can obstruct the way of doing science. Knowing the systems thinking process is an essential approach to understanding how scientific products are influenced by various factors. Research on cognitive biases can help this interest in understanding these limitations among scientists. We discuss scientific activities that consider the history and philosophy of science and the sustainable future requiring creative problem solving, which can be very susceptible to cognitive biases. We also pay attention to the multilayered nature of current scientific work, where the scientist works individually and collaborates with colleagues. Thus, this paper discusses the framework of cognitive biases related to scientific work. Weighing those considerations, we construct an alternative new framework by listing the biases in scientific work. We close by recommending the validation of this framework to become a potential construct that would be helpful for further study.

Full article
Journal ID : TRKU-07-03-2021-11440
Total View : 570

Title : EFFECT OF DIESEL FUEL, BIODIESEL B20 AND BIODIESEL B30 AT CAT 3406 ENGINE ON THE GREENHOUSE EMISSIONS IN PT. BUKIT ASAM TBK

Abstract :

Indonesia is one of the richest countries for the renewable and nonrenewable energy resources. The energy source is needed to fulfil the household, industrial and mining needs. A coal mining process particular in PT. Bukit Asam used petroleum to run the production equipment. Cat 3406 engine which used in D8R is one of the production equipment that pushing the coal in TLS (Train Loading Station). Due to the energy source of D8R is derived from diesel, the combustion processing in the combustion chamber produces exhaust gas emissions. The emissions are too dangerous for humans, hence, to analyze the exhaust gas substance is required. In this research, collecting data of diesel, biodiesel B20 and biodiesel B30 due the engine rotation at 800 rpm and 2100 rpm at each variation is carried out. The generated gas is analyzed using measured exhaust gas emissions. As the results, B30 produced lowest emissions, while the highest torque is generated by diesel. The amount of fuel consumption for diesel and biodiesel are same.

Full article

Certificates


//